Is this proper? Other threads seem a bit vague so not sure. Vinyl, only info in runoff is:

FM10714

TIA

Edited November 1, 200816 yr by happyhammer

Looks like the 2nd boot to me I'm afraid

  Pete S said:

Looks like the 2nd boot to me I'm afraid

Certainly looks like it...i've got the multi coloured issue but i've seen the DJ copy and it looks different

Cheers lads, thought so to be honest 'cos I got it far too cheap on ebay

Thanks again

  Beeks said:

Certainly looks like it...i've got the multi coloured issue but i've seen the DJ copy and it looks different

There's two or three different dj copies though, there is a legit white one, there's a red one too. The first boot of the WD is vinyl, the second is styrene, which I think is what you have there.

Hi Pete, this is deffo vinyl but I had a look at the short thread on here and there's mention of info in the run off - this only has the number. Let's face it, I got it for £16 & the days of bargains like this on the bay are long gone. Glad I didn't pay any more though...

  happyhammer said:

this is deffo vinyl but I had a look at the short thread on here and there's mention of info in the run off - this only has the number.

The picture you have put up shows a styrene record, not vinyl.

  happyhammer said:

this is deffo vinyl

The record in the scan above looks like it's pressed on styrene, not vinyl. It would surprise me if it's vinyl as you can clearly see the edge of the paper label in the scan (vinyl have moulded labels).

  Sebastian said:

The record in the scan above looks like it's pressed on styrene, not vinyl. It would surprise me if it's vinyl as you can clearly see the edge of the paper label in the scan (vinyl have moulded labels).

That is what I thought from the Scan,

I have provided details of one of the Original DEMO's in "THE SHARP END OF VINYL"

Here's the VINYL boot...

It's very bendy for styrene - thought one of the signs was that styrene was inflexible/brittle?