Dave Moore Posted February 24, 2023 Share Posted February 24, 2023 Hoping someone can steer me in the right direction with a perplexing, strange techie anomaly. My Pioneer 600 will only play out of one side of the XLR Output. (LEFT) The RCA outputs are fine. I have carried out all the usual faultfinding but to no avail. So I bought another Pioneer 600 as a back up. Unit was MINT. Set the new mixer up and hey presto... same issue! All Turntables, Speakers and cabling seem to be working fine! I'm at a loss as to what to try next so if anyone has had this type of issue before and can throw something into the mix I'd be grateful. Cheers, Dave Link to comment Social source share More sharing options...
Soulagogo Posted February 24, 2023 Share Posted February 24, 2023 Hi. Have changed speakers round? One could have fault have you changed cartridges one channel lead could be broken Good luck Richard Link to comment Social source share More sharing options...
Steviehay Posted February 24, 2023 Share Posted February 24, 2023 leads,heads,wrong connection mind over matter ,master or gains numerous of issues need to see a vid ?? Link to comment Social source share More sharing options...
Dave Moore Posted February 24, 2023 Author Share Posted February 24, 2023 Been faultfinding for the best part of 4 hours now and STILL can't tie down the problem. ALL the components of the system seem to be working perfectly until you put them all together! The 2 Pioneer mixers display the same faults when in the set up but the system works perfectly with a Vestax mixer in it! Will have another go once my head's cleared tomorrow before admitting defeat and having a pro look at it. Thanks for the input. Cheers, Dave Link to comment Social source share More sharing options...
Steviehay Posted February 25, 2023 Share Posted February 25, 2023 last from me stereo or mono ?? is there a switch to change Link to comment Social source share More sharing options...
Stompingsevens Posted February 26, 2023 Share Posted February 26, 2023 Check on your amp to see if there is a switch for the cartridge type (MC, MM etc) and switch through the choices to check it has correct chanelling. Just a thought! Link to comment Social source share More sharing options...
Spook Posted February 26, 2023 Share Posted February 26, 2023 21 hours ago, Steviehay said: last from me stereo or mono ?? is there a switch to change There is a mono/ stereo switch above the master level LEDS and a Master balance Left/ Right just above the Booth Monitor. Link to comment Social source share More sharing options...
Steviehay Posted February 26, 2023 Share Posted February 26, 2023 58 minutes ago, Spook said: There is a mono/ stereo switch above the master level LEDS and a Master balance Left/ Right just above the Booth Monitor. try switching it both ways Link to comment Social source share More sharing options...
Recommended Posts
Get involved with Soul Source
Add your comments now
Join Soul Source
A free & easy soul music affair!
Join Soul Source now!Log in to Soul Source
Jump right back in!
Log in now!