hope this is in the correct section...looking to replace a pair of ortofon pro s styli. Are there a slightly better quality type..for home use on Technics decks..to get a good quality sound from northern soul 45's..thanks in advance..

I was, in fact still am in the market for some and asked the same question - give or take a few variation of the brand you're using you can't go too far wrong. 

Well that was the general concusses you unless you spend BIG money. 

Edited December 15, 201410 yr by TailorMade Gaz B

  On 15/12/2014 at 12:29, SHEFFSOUL said:

hope this is in the correct section...looking to replace a pair of ortofon pro s styli. Are there a slightly better quality type..for home use on Technics decks..to get a good quality sound from northern soul 45's..thanks in advance..

 

if its all running through a cheap amp mixer speaker set up i wouldn't bother upgrading. 

This one is excellent value for money.

 

https://ortofon.com/hifi/products/cartridges/2m-series/2m-red

Anyone know a reputable ebay seller for the Ortofon Pro? 

  On 15/12/2014 at 12:57, JNixon said:

if its all running through a cheap amp mixer speaker set up i wouldn't bother upgrading. 

sherwood amp..Mordant Short spks...

I use Stanton 500 series, alway worked well for me................. 

Edited December 15, 201410 yr by Chris L

  On 15/12/2014 at 12:29, SHEFFSOUL said:

hope this is in the correct section...looking to replace a pair of ortofon pro s styli. Are there a slightly better quality type..for home use on Technics decks..to get a good quality sound from northern soul 45's..thanks in advance..

The best I've ever used is the Shure White Label cart. They track with very little weight, sound really clear, and the replacement stylus is very reasonable. I wouldn't use anything else.

 

Stanton 500 are very old technology, and not very good by todays standard. The needle sits very high in the groove and needs a lot of weight to track and sound right. That = heavy wear of your precious vinyl. I wouldn't use them personally.

 

 

Edited December 15, 201410 yr by Quinvy

  On 15/12/2014 at 12:29, SHEFFSOUL said:

hope this is in the correct section...looking to replace a pair of ortofon pro s styli. Are there a slightly better quality type..for home use on Technics decks..to get a good quality sound from northern soul 45's..thanks in advance..

 

I would strongly recommend the Audio Technic AT120E,it is an absolute referance on the Technics,far better than Ortofon and Shure and Stanton.I have it on my SL1210MK5G...go read what Audiophilles say on hi-fi forums,like audioasylum...

Always used Stanton 500s.Just for home use seem to perform fine to me and i always weight to only 2.5 g

Elliptical stylus as in Ortofon Mk2, concorde.

https://ortofon.com/dj/products/dj-cartridges-selector/concorde-nightclub-mkii

 

Possibly the best on the market.

  On 15/12/2014 at 18:44, mellorful said:

Elliptical stylus as in Ortofon Mk2, concorde.

https://ortofon.com/dj/products/dj-cartridges-selector/concorde-nightclub-mkii

 

Possibly the best on the market.

Once tried an elliptical stylus which I found bloody awful. Just saying like.

  On 15/12/2014 at 18:36, Patto said:

Always used Stanton 500s.Just for home use seem to perform fine to me and i always weight to only 2.5 g

You haven't compared them to anything else though. The difference was huge.

  On 15/12/2014 at 18:02, UPTITE U250A said:

I would strongly recommend the Audio Technic AT120E,it is an absolute referance on the Technics,far better than Ortofon and Shure and Stanton.I have it on my SL1210MK5G...go read what Audiophilles say on hi-fi forums,like audioasylum...

Yes but we aren't playing mint albums, we are playing used 60's 45's.

  On 15/12/2014 at 19:02, Quinvy said:

Once tried an elliptical stylus which I found bloody awful. Just saying like.

The Ortofon site confirms the Mk2 has been re-engineered but needs the whole cartridge rather than just the needle, that is sometimes overlooked.

The technical data could easily be compared to that of other makes. 

I appreciate we are probably talking about using the needle on records manufactured in the 1960's and much of it will be styrene, hence wear is a factor is best minimised. A light cartridge with a needle that drops deeper into the groove should help protect the precious styrene from the wear handed out by many older models and products. 

 

Stanton Groovemaster have also gone for the elliptical needle but I didn't locate their technical data so couldn't compare. I've not tried these though.

https://www.stantondj.com/stanton-cartridges/groovemasterv3.html

 

The shure white technical data can be compared with ortofon Mk2

https://www.shure.co.uk/products/dj_phono/whlb

 

Must admit the technical data is similar, I may be asking for Santa to bring me a Shure White and then I can make a direct comparision to my Ortofon Mk2 on several records with differing levels of wear for a real test. If I'm really lucky he will bring me a Stanton groovemaster as well.

 

You would think someone on this site (especially people who often play out expensive records) would have bench tested the various cartridges for sound quality and wear & tear to those precious records.

  On 15/12/2014 at 18:02, UPTITE U250A said:

I would strongly recommend the Audio Technic AT120E,it is an absolute referance on the Technics,far better than Ortofon and Shure and Stanton.I have it on my SL1210MK5G...go read what Audiophilles say on hi-fi forums,like audioasylum...

I've been thinking of giving this a try, what headshell do you use this with ? They seem to be well rated by all who've tried them don't they ?

  On 15/12/2014 at 19:05, Quinvy said:

Yes but we aren't playing mint albums, we are playing used 60's 45's.

Does that matter though ? I would have thought the whole idea was to get a true representation of sound and clarity of your records . Or are we all looking for different things ?

Maybe some people are looking for a "duller" sound to compensate for worn 45s ?

Not me.

  On 15/12/2014 at 13:20, Noggin said:

Anyone know a reputable ebay seller for the Ortofon Pro? 

I'm awaiting some arriving. These are the ones.

Edited December 15, 201410 yr by donkit

  On 15/12/2014 at 20:04, Ivor Jones said:

Does that matter though ? I would have thought the whole idea was to get a true representation of sound and clarity of your records . Or are we all looking for different things ?

Maybe some people are looking for a "duller" sound to compensate for worn 45s ?

Not me.

No Ivor, but most audiophiles are trying to achieve perfection in stereo. The White Label is a meant for a club environment so tracks really well and doesn't jump out of the groove easily. I don't have any stereo records, so I don't need an audiophile cart.

 

I bought a Project turntable with an elliptical stylus a couple of years ago. It was very quiet. I had to turn the volume up very high. I wasn't happy so I took it back to the shop and exchanged it for a send hand Technics 1200 with just a Stanton 500 cart fitted. It nearly blew the bloody windows out compared to the other one. After fitting the White Label it was amazing.

Ok, I see what you're saying. I'm using the Technics 1210 at the moment with a Stanton 580 Mark II. It's a decent sound but I just wonder if there could be any improvement at all.

Was just thinking of giving the Audio Technica a try, quite expensive though in comparison to many....

  On 15/12/2014 at 21:05, Quinvy said:

No Ivor, but most audiophiles are trying to achieve perfection in stereo. The White Label is a meant for a club environment so tracks really well and doesn't jump out of the groove easily. I don't have any stereo records, so I don't need an audiophile cart.

 

I bought a Project turntable with an elliptical stylus a couple of years ago. It was very quiet. I had to turn the volume up very high. I wasn't happy so I took it back to the shop and exchanged it for a send hand Technics 1200 with just a Stanton 500 cart fitted. It nearly blew the bloody windows out compared to the other one. After fitting the White Label it was amazing.

 

If you only play mono records, it might be an idea to get a proper mono stylus/cartridge.

The mono stylus in the Ortofon 2M range for example:

https://ortofon.com/hifi/products/cartridges/2m-series/2m-mono

I like the Banana stylus, it's designed for djing, hence the bass feel is bang on (luvverly on 50's & 60's uS 45's) I run it on a Numark TTXUSB, which again is designed for djing, but is great for home use.

When people were having trouble with that motown box set jumping and skipping I tried some on my deck with this set up and they played through no problem. Generally this seems to be the case, records that sometimes jump on other decks will play on this (obviously badly scratched/damaged won't play, for that you need an old Dansette with the 78 needle  
https://www.juno.co.uk/products/tonar-banana-cartridge-stylus-yellow/309170-01/ 
https://www.decks.co.uk/products/decks/numark/ttx-usb

  On 15/12/2014 at 19:05, Quinvy said:

Yes but we aren't playing mint albums, we are playing used 60's 45's.

So what ? I can't see your argument -you have none,other than you are alluding that playing NS 45's using quality equipment is....?

I am an audiophille and I enjoy listening to NS through hifidelity equipment,it does make a difference....a huge difference....

  On 18/12/2014 at 13:37, UPTITE U250A said:

So what ? I can't see your argument -you have none,other than you are alluding that playing NS 45's using quality equipment is....?

I am an audiophille and I enjoy listening to NS through hifidelity equipment,it does make a difference....a huge difference....

What I think Quinvy is saying is that mono soul 45's have a limited resolution. For example, if you play a copy of "if this is love" by the Precisions the detail simply Isin't there to hear, no matter how good your set up. I have to agree with an earlier post that the single most important thing you can do to improve sound quality is to play your mono records with a mono stylus.

Love and peace, Dave

Edited December 19, 201410 yr by Only Dreaming

  On 15/12/2014 at 21:05, Quinvy said:

I bought a Project turntable with an elliptical stylus a couple of years ago. It was very quiet. I had to turn the volume up very high. I wasn't happy so I took it back to the shop and exchanged it for a send hand Technics 1200 with just a Stanton 500 cart fitted. It nearly blew the bloody windows out compared to the other one. After fitting the White Label it was amazing.

 

Are you sure you didn't connect an MC needle to a MM phono stage? That would explain the low volume.

Have always bought styli from Manta Audio Skipwith , Selby . Over 500 types in stock and on line www.mantra-audio.co.uk

I use a nail going through a plastic cup.

  On 19/12/2014 at 15:22, LarsC said:

Are you sure you didn't connect an MC needle to a MM phono stage? That would explain the low volume.

That went completely over my head Lars. I am not a hi-fi expert. 

  On 19/12/2014 at 20:57, Quinvy said:

That went completely over my head Lars. I am not a hi-fi expert. 

 

MC = moving coil, MM = moving magnet, some amps have inputs for both, get them mixed up and the input isn't matched correctly, without looking i think the moving coil is a lower input level, so the sound would be lower.  

I have just bought a pair of Audio Technica turntables which I am very impressed with. The cartridges and needles supplied seem okay although quite heavy. I was thinking of upgrading at some stage to the Ortofon Concorde Pros that you can buy as a pair for approx £120. They seem pretty good according to online reviews and YouTube clips. Them Shure white label ones look good and again are highly thought of according to online reviews.

I'VE JUST COMPARED A ORTOFON OM PRO S CARTRIDGE AGAINST A STANTON 500AL & WOULD SAY IF YOU WANT BEEFY SOUND IT'S GOT TO BE THE STANTON WHICH I USE FOR DJING. THE ORTOFON HAS LESS BEEF BUT HANDLES TOP ENDS BETTER. OVER THE YEARS I HAVE USED BOTH.

+1 for white labels. 

can get a set for 150 on amazon, sound great, cheap to replace stylus, very light tracking. No brainer.

Also, to the person who stated that the fidelity in the original recording isn't there, bullshit. 

it requires more precision to get it out d/t recording limitations, but those microphones pick up ALL THE NOISE.

I play tested a copy of why girl on my friends tt and mine (vpi classic 1 w/a dynavector red, No comparison. tambourine is in the mix, the background vocals are forward when appropriate... not so on my pals tt.

  On 20/12/2014 at 17:31, Sklag said:

Also, to the person who stated that the fidelity in the original recording isn't there, bullshit. 

it requires more precision to get it out d/t recording limitations, but those microphones pick up ALL THE NOISE.

I play tested a copy of why girl on my friends tt and mine (vpi classic 1 w/a dynavector red, No comparison. tambourine is in the mix, the background vocals are forward when appropriate... not so on my pals tt.

That’s an Interesting point. Can you post a sound-clip of "Why girl" recorded from your TT? I’ll do the same tomorrow using my Stanton AL500 for comparasion.

If enough people did the same, maybe we could arrive at some definitive conclusions in this thread? Any thoughts appreciated. 

 

Dave

Edited December 20, 201410 yr by Only Dreaming

AT THE END OF THE DAY IT DEPENDS ON THE LISTENERS PREFERENCE ON TONE AGE . AT HOME I USE A TECHNIC AMP & 1210 DECK  GOING THROUGH GALE GOLD MONITORS.

 

IF YOU WANT TO BE TOTALLY AUTHENTIC PLAYING 60'S VINYL USE DERAM CERAMIC CARTRIDGES NOT ADVISABLE BECAUSE OF THERE TRACKING WEIGHT. OR TRY SHURE   M33.

 

MY PREFERENCE STILL IS STANTON 500AL & SECOND BEST IS ORTOFONS.

  On 19/12/2014 at 16:57, Pete S said:

I use a nail going through a plastic cup.

 

...... .....what tracking weight did you use for playback of The Classics you sold....? !!!

  On 21/12/2014 at 11:21, UPTITE U250A said:

...... .....what tracking weight did you use for playback of The Classics you sold....? !!!

 

I've got a feeling I never actually saw that record, I just did the deal.

  On 21/12/2014 at 12:40, Pete S said:

I've got a feeling I never actually saw that record, I just did the deal.

so you did'nt know the record then.... !

and for the Salvadores you did'nt play that either ?

I use a project deck with ortofon pro s cart in the house, spot on. Just ordered a pair of ortofon carts pro s for my cheaper pair of decks. Track lighter, good reproduction and not costing the earth. Juno good site for price and service. I use a Cambridge pro amp and gale speakers.

Edited December 23, 201410 yr by Mark H CSC

  On 15/12/2014 at 12:29, SHEFFSOUL said:

hope this is in the correct section...looking to replace a pair of ortofon pro s styli. Are there a slightly better quality type..for home use on Technics decks..to get a good quality sound from northern soul 45's..thanks in advance..

 

They look about £50.00 each, sound about right ?

  On 23/12/2014 at 17:04, Chris L said:

They look about £50.00 each, sound about right ?

 

bought a pair for £60 off the net from a reputable dealer..when i used them the sound was no different from those i'd intended to replace..so returned them and got a full refund..

What no needle required! Has anyone tried one of these?

https://www.elpj.com/

  On 24/12/2014 at 01:38, mellorful said:

What no needle required! Has anyone tried one of these?

https://www.elpj.com/

 

I think I once saw them being used in a Star Trek episode !

  On 23/12/2014 at 23:19, SHEFFSOUL said:

bought a pair for £60 off the net from a reputable dealer..when i used them the sound was no different from those i'd intended to replace..so returned them and got a full refund..

 

Yes you have to be careful, especially buying styli from a private seller, they could easily be used and clapped out (the seller may not even know that). Just bought a new Staton 500 in the US, for less than £30.00 including shipping.

  On 24/12/2014 at 08:53, Chris L said:

Yes you have to be careful, especially buying styli from a private seller, they could easily be used and clapped out (the seller may not even know that). Just bought a new Staton 500 in the US, for less than £30.00 including shipping.

 

if it works for you..pls send a link...

Just bought Shure White label cartridge and stylus from Juno after reading the recommendations on this piece of kit.

 

Ordered and paid through Juno's Site yesterday at 3 O'clock in the afternoon and delivered by parcel force this morning at 9:30 AM.

 

Commendable performance considering the time of year.

 

Credit where it's due - well done Juno records !

 

Merry Christmas to all.

 

John

  On 24/12/2014 at 12:40, Johnny Mack said:

Just bought Shure White label cartridge and stylus from Juno after reading the recommendations on this piece of kit.

 

Ordered and paid through Juno's Site yesterday at 3 O'clock in the afternoon and delivered by parcel force this morning at 9:30 AM.

 

Commendable performance considering the time of year.

 

Credit where it's due - well done Juno records !

 

Merry Christmas to all.

 

John

I hope you like them John. I love them. If you have been using light carts you will need to screw the extra weights back onto the tone arm.

Slightly of topic just been listening on YouTube to 2 of manships recent sales Felix Harris and Eddie Smith they sounded real bad compared to his usual. Wonder if he needs new styli lol