Soundburger At727 Wiring Diagram / Info?

[Mace]

Has anyone got a wiring diagram for a Audio-Technica Soundburger AT727, or know where I can find one....specifically for the wiring harness from stylus head to the small circuit board at rear of arm.

Trying to fix one for a certain 'Father Ted lookalikie' Geordie......Steve Hiscock.

Getting no sound out of it, though turntable works okay.

Opened up bodyshell to locate main PCB and found a piece of rolled up tin foil inside one of the headphone sockets, which could possible short out the connections for the mini-jack. Not sure if this may have blown a component on the main PCB, but need to ensure stylus wiring is correct to start with.

There are 2 headphone mini-jack sockets (A + B)

Do headphones with single mini-jack work if plugged in either A or B?

He tells me there were originally 5 wires at the back of the stylus head (4 that connect to head - black/white/green & red) and another black that didnt show at the rear end of the arm to the circuit board.

Is this an earth wire? Is it soldered inside the arm cus I can't see any evidence of it.

Hope he knows I charge a minimum of £25 per hour.....(this email took me 30 minutes to type)

Any invoices for info / consultation charges will have to be forwarded to Steve himself

Cheers

Mace

Edited March 13, 2010 by Mace

[Soulcarp]

Has anyone got a wiring diagram for a Audio-Technica Soundburger AT727, or know where I can find one....specifically for the wiring harness from stylus head to the small circuit board at rear of arm.

Trying to fix one for a certain 'Father Ted lookalikie' Geordie......Steve Hiscock.

Getting no sound out of it, though turntable works okay.

Opened up bodyshell to locate main PCB and found a piece of rolled up tin foil inside one of the headphone sockets, which could possible short out the connections for the mini-jack. Not sure if this may have blown a component on the main PCB, but need to ensure stylus wiring is correct to start with.

There are 2 headphone mini-jack sockets (A + B)

Do headphones with single mini-jack work if plugged in either A or B?

He tells me there were originally 5 wires at the back of the stylus head (4 that connect to head - black/white/green & red) and another black that didnt show at the rear end of the arm to the circuit board.

Is this an earth wire? Is it soldered inside the arm cus I can't see any evidence of it.

Hope he knows I charge a minimum of £25 per hour.....(this email took me 30 minutes to type)

Any invoices for info / consultation charges will have to be forwarded to Steve himself

Cheers

Mace

I'm sure if you get in touch with boxy on here he will help you out.i lent him my soundburger so he could do the wiring on is hope this helps johno

[Denbo]

Has anyone got a wiring diagram for a Audio-Technica Soundburger AT727, or know where I can find one....specifically for the wiring harness from stylus head to the small circuit board at rear of arm.

Trying to fix one for a certain 'Father Ted lookalikie' Geordie......Steve Hiscock.

Getting no sound out of it, though turntable works okay.

Opened up bodyshell to locate main PCB and found a piece of rolled up tin foil inside one of the headphone sockets, which could possible short out the connections for the mini-jack. Not sure if this may have blown a component on the main PCB, but need to ensure stylus wiring is correct to start with.

There are 2 headphone mini-jack sockets (A + B)

Do headphones with single mini-jack work if plugged in either A or B?

He tells me there were originally 5 wires at the back of the stylus head (4 that connect to head - black/white/green & red) and another black that didnt show at the rear end of the arm to the circuit board.

Is this an earth wire? Is it soldered inside the arm cus I can't see any evidence of it.

Hope he knows I charge a minimum of £25 per hour.....(this email took me 30 minutes to type)

Any invoices for info / consultation charges will have to be forwarded to Steve himself

Cheers

Mace

Hi Mace,

I'm pretty sure I have the circuit diagram you're talking about but can't even begin to search for it until the weekend I'm afraid.

Drop me an email Friday night as a reminder, if you're not already sorted before then.

In answer to your question;

There are 2 headphone mini-jack sockets (A + B)

Do headphones with single mini-jack work if plugged in either A or B?

Yes, they work in either.

Have you got Ste's email address so I can scan and attach my invoice.

Denbo.

[Mace]

Hi Mace,

I'm pretty sure I have the circuit diagram you're talking about but can't even begin to search for it until the weekend I'm afraid.

Drop me an email Friday night as a reminder, if you're not already sorted before then.

In answer to your question;

There are 2 headphone mini-jack sockets (A + B)

Do headphones with single mini-jack work if plugged in either A or B?

Yes, they work in either.

Have you got Ste's email address so I can scan and attach my invoice.

Denbo.

Cheers Soulcarp and Denbo.

Dennis, take your time mate and find it at your leisure this weekend...I'm gonna be kinda busy in Allentown until Monday

Also, Mr Hiscock is grey enough as it is.....two invoices will send him bald......I'll put your rate on my invoice and get you a pint

[Denbo]

Cheers Soulcarp and Denbo.

Dennis, take your time mate and find it at your leisure this weekend...I'm gonna be kinda busy in Allentown until Monday

Also, Mr Hiscock is grey enough as it is.....two invoices will send him bald......I'll put your rate on my invoice and get you a pint

Don't find anything TOO good in Allentown will ya.

I'm rooting for John in Austin.

Seriously, have a good trip. Drop me an email when you get back so I can bell you for a preview of what's to come. Face Full Of Mace Vol.3 perhaps?

Edited March 16, 2010 by denbo

[abbeyrnb]

Cheers Soulcarp and Denbo.

Dennis, take your time mate and find it at your leisure this weekend...I'm gonna be kinda busy in Allentown until Monday

Also, Mr Hiscock is grey enough as it is.....two invoices will send him bald......I'll put your rate on my invoice and get you a pint

He he Mace whats with all this talk of invoices ( must be Italian for something cheeky ! ) Glad to see you still cracking on with it bud keep up the good work . I can tell you refuse to let it beat you .

Denbo you defo take your time looking if there is cash involved .

Thanks Jonho ( glad to see somebody offers info and not on the take refreshing and in the right spirit of things ) for the info but heaven help me if a third invoice apears from another source

Need a lie down in a dark room now with the pressure of how much this is going to cost . Will need to sell it to pay for it to be fixed at this rate !!

Edited March 16, 2010 by abbeyrnb

[Ezzie Brown]

hi steve..........did u buy that carol morgan on e bay fella.???????...........and wots the money on roy milton on movin...and prince ella..............??????????regards ezzie

[abbeyrnb]

hi steve..........did u buy that carol morgan on e bay fella.???????...........and wots the money on roy milton on movin...and prince ella..............??????????regards ezzie

Hey Up Bud hope you are well and will see you at radcliffe if you are going ? No didnt get that one went for $103 dollars I think . I have Pm'd you re other bits SSShhh !

[abbeyrnb]

Hi Mace,

I'm pretty sure I have the circuit diagram you're talking about but can't even begin to search for it until the weekend I'm afraid.

Drop me an email Friday night as a reminder, if you're not already sorted before then.

In answer to your question;

There are 2 headphone mini-jack sockets (A + B)

Do headphones with single mini-jack work if plugged in either A or B?

Yes, they work in either.

Have you got Ste's email address so I can scan and attach my invoice.

Denbo.

Denbo give over you can buy me a pint next I show my face at Hideaway unless I see you somewhere else first .

SH

[Guest rusty]

Hi Denbo

would really apreciate a wiring diagram for my soundburger AT727 as unfortunately trying to adust the speed using the rotated screws I pushed the screw inside the unit and when opening the unit all the wires came detached and I haven't a clue where they go.

I would be eternally greatfull if you can also reccomend anybody together with a contact number that I can contact. I need somebody to repair it as I'm not technical at all

Many thanks

Rusty

[soulsalmon]

Have you tried Audio Technicas site,sure thats where i got my manual from,complete with wiring diagrams ?,could buy a Crossley revolution for what it will cost to repair,almost as good,but with being new repairs are easy